Fast, Experienced Hot Tub Wiring in Minneapolis – St. Paul MN
- Our Minneapolis Electricians provide fast, professional results for your home.
- We are licensed and Insured with up-to-date knowledge of safety standards and codes.
- Dean’s Home Services Electricians evaluate electrical service issues then explain all available options
- Present you with a price before the work beings
Local Minneapolis Electricians
We’ve provided the Twin Cities area with top-notch hot tub wiring installation, repair, and replacement for years. We always come highly recommended, we have over 5,000 Five Star Google reviews, and we’ve even received an A+ rating from the Better Business Bureau!
As tempting as it might be, never try to wire your own hot tub. It’s incredibly dangerous and can lead to a tripped circuit, or short-circuiting. After all, wiring is risky, to begin with, and hot tubs add water to the equation. So, don’t attempt to do your own. Instead, rely on a professional electrician. We promise it’ll save you an awful lot of headaches and maybe even a trip to the hospital or morgue!
Additionally, there are incredibly specific local codes and guidelines that you must follow whenever wiring a hot tub. You have to hard-wire the hot tub into a ground fault circuit interrupter, or a 60-amp dedicated circuit. Furthermore, you must have an electrical inspector inspect every aspect of your installation before powering on your hot tub or filling it with water.
Rather than deal with all that headache and potential danger yourself, why not hire us? Remember, when it comes to fast, reliable, and affordable hot tub wiring in Minneapolis you can always count on us!
Electrical Wiring Repairs for Home Hot Tubs & Saunas
As with anything else, your hot tub’s wiring will eventually need repairs. Dean’s Home Services Minneapolis Electrical repair service will diagnose and repair electrical issues. Some of the things you may notice include:
- Jets stop working or work intermittently
- The jets work, but the hot tub never heats up
- The lighting system is on the fritz, causing flickering lights or lights that never turn off
- Your hot tub circuit breaker trips constantly
Hot Tub Wiring Mistakes
When homeowners try their hand wiring and electrical hot tub, they inevitably run into a handful of issues. These are some of the most DIY wiring mistakes.
When homeowners attempt to wire their own tub, they often run into issues when they try to turn it on. If the circuit breaker trips whenever you turn on your hot tub, there may be moisture in the wiring or the wiring may not have been installed correctly. A professional electrician will ensure that your new hot tub is as safe as possible.
NO GFCI Protection
A licensed electrician can ensure that your tub has a functioning ground fault circuit interrupter (GFCI) and is appropriately grounded. Without these safeguards, people using the hot tub could experience shocks or fatal electrocution.
Bonding and Waterproofing Mistakes
Outdoor electrical components should be adequately weatherproofed, and this is particularly true of systems that come into regular contact with water. Each wire and metal component needs to be properly insulated, waterproofed, and bonded to the rest of the system.
Home Sauna Wiring in Minneapolis – St. Paul, MN
Contact Dean’s Home Services Electricians for all your Minneapolis Hot Tub Wiring Needs. Dean’s Home Services provides Plumbing, Heating, and Cooling, Electrical & Drain Cleaning services throughout the Twin Cities area. Dean’s Home Services Emergency Electricians service area includes the entire Twin Cities metro including Brooklyn Park, Plymouth, White Bear Lake, Burnsville, Bloomington, Inver Grove Heights, Woodbury, and more.
Wiring Hot Tubs in Minneapolis St. Paul FAQ
There is no standard answer because the cost can vary based on your home’s electrical system. In older Twin Cities homes, electricians encounter issues with tripping breakers or a lack of GFCI outlets. The wiring can cost several hundred dollars in parts, plus conduit and fittings.
Most spas operate on a dedicated circuit of 50 or 60 amps at 230 volts. To connect a hot tub to this circuit, an electrician must integrate your home’s main circuit breaker with a 50 or 60-amp breaker in the external disconnect box. The GFCI will correspond with the house breaker so that a 60A GFCI is paired with a 60A house breaker. Whether you need 50A or 60A depends on the number and size of pumps in your hot tub.
For a Hot Tub Wiring specialist in the Twin Cities and the surrounding areas, schedule an appointment today.
With Dean’s Hot Tub Wiring Services You Get:
- Over 100 Years of Combined Industry Experience
- We Strive for 100% Customer Satisfaction
- Fast and Reliable Service
- Clean & Friendly Service Professionals